New Grinder Bearing

New Teeth and Pockets

Fully Serviced

899 Hours

The Barreto 30SG stump grinder is a powerful machine designed for efficiently removing tree stumps. Let’s delve into its features:

1. Design and Engine:

   • The 30SG features a variant of the same time-tested track drive platform used by the RTK trencher series.

   • It is powered by a 31hp Briggs & Stratton Vanguard V-Twin engine.

   • The hydraulically-driven cutter wheel is raised and lowered into the stump and then moved from side to side to cut down.

2. Controls:

   • The cutter wheel operation and articulating arm are operated by controls mounted on the console.

   • The cutter wheel is activated by a switch on the control stick, with a secondary safety switch to prevent accidental engagement.

   • Back-and-forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console.

3. Features:

   • Easy controls: Operate the track drive and cutter wheel.

   • Time-tested track design: Absorbs impact and provides stability.

   • Center-mounted cutter wheel: Provides a 134º head swing.

   • Hydraulic drive: Eliminates costly belts and ensures consistent power.

   • Track drive: Increases maneuverability around the job site.

4. Specifications:

   • Engine: Briggs & Stratton Vanguard V-Twin, 31hp.

   • Weight: 1,700 lb.

   • Cutting Depth: 12 inches.

   • Cutting Height: 32 inches.

   • Head Swing: 134º, 99.7-inch arc.

   • Track Width: 7.1 inches.

   • Total Ground Contact: 470 sq. in.

   • Ground Drive Forward: 290 ft/min.

   • Ground Drive Reverse: 180 ft/min.

   • Cutting Wheel Diameter: 19.2 inches.

   • Cutting Teeth: 0.750-inch thick, 16 green teeth.

*Payment based on 60 months at 7% APR - With Approved Credit

Located in Sarasota FL

Local Pickup Only