Hitachi G12SE2 4-1/2" Angle Grinder

Hitachi G12SE2 4-1/2" Angle Grinder

$0.00

The G12SE2 4-1/2" Angle Grinder is compact and powerful. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.  The Hitachi Disk Grinder uses a heavy-duty 9.5 Amp motor to provide you with 1,900 watts of forcible output power for the toughest grinding jobs, it offers a no-load speed of 10,000 RPM. The commercial-grade helical cut gears increase durability and the specially sealed armature coil reduces wear caused by ingested debris. Weighing only 4-1/5 pounds, this tool's lightweight, ergonomic design makes it easy to use, the paddle switch with lock-on feature and 2-position removable side handle also increase comfort and control. This tool comes with a spanner wrench and a 4-1/2-inch diameter, depressed center grinding wheel with standard 5/8-inch arbor, the tool-less wheel guard can be adjusted to any angle for added versatility. The convenient carbon brush access allows you to replace the brush as needed to greatly prolong the life of the tool.

RESERVE THIS ITEM
HITACHI CR13V 10 AMP RECIPROCATING HAND SAW

HITACHI CR13V 10 AMP RECIPROCATING HAND SAW

$0.00
Core Cut CC1800XL Walk Behind Saw

Core Cut CC1800XL Walk Behind Saw

$0.00
HITACHI CS7B2 7 1/4" ELECTRIC CIRCULAR SAW

HITACHI CS7B2 7 1/4" ELECTRIC CIRCULAR SAW

$0.00
HITACHI CJ110MV VARIABLE SPEED JIG SAW

HITACHI CJ110MV VARIABLE SPEED JIG SAW

$0.00
HUSQVARNA 14" WET ELECTRIC CONCRETE CUT OFF SAW

HUSQVARNA 14" WET ELECTRIC CONCRETE CUT OFF SAW

$0.00